PKA 7.3.4.4
R1
R1>ena
R1#show ip
eigrp topology
IP-EIGRP
Topology Table for AS 1/ID(192.168.10.5)
Codes: P -
Passive, A - Active, U - Update, Q - Query, R - Reply,
r - Reply
status
P
172.16.1.0/24, 1 successors, FD is 2816
via
Connected, GigabitEthernet0/0
P 172.16.2.0/24,
1 successors, FD is 2170112
via
172.16.3.2 (2170112/2816), Serial0/0/0
P
172.16.3.0/30, 1 successors, FD is 2169856
via
Connected, Serial0/0/0
P
192.168.1.0/24, 1 successors, FD is 2170112
via
192.168.10.6 (2170112/2816), Serial0/0/1
P 192.168.10.4/30,
1 successors, FD is 2169856
via
Connected, Serial0/0/1
P
192.168.10.8/30, 2 successors, FD is 2681856
via
192.168.10.6 (2681856/2169856), Serial0/0/1
via
172.16.3.2 (2681856/2169856), Serial0/0/0
R1#
R1#debug ei
R1#debug
eigrp f
R1#debug
eigrp fsm
EIGRP FSM
Events/Actions debugging is on
R1#show ip route
R2
R2>ena
R2#show ip
route
Codes: L -
local, C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP,
EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF
NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF
external type 1, E2 - OSPF external type 2, E - EGP
i - IS-IS,
L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
* -
candidate default, U - per-user static route, o - ODR
P - periodic
downloaded static route
Gateway of
last resort is not set
172.16.0.0/16
is variably subnetted, 5 subnets, 3 masks
D
172.16.1.0/24 [90/2170112] via 172.16.3.1, 00:01:03, Serial0/0/0
C
172.16.2.0/24 is directly connected, GigabitEthernet0/0
L
172.16.2.254/32 is directly connected, GigabitEthernet0/0
C
172.16.3.0/30 is directly connected, Serial0/0/0
L
172.16.3.2/32 is directly connected, Serial0/0/0
D
192.168.1.0/24 [90/2170112] via 192.168.10.10, 00:01:04, Serial0/0/1
192.168.10.0/24
is variably subnetted, 3 subnets, 2 masks
D
192.168.10.4/30 [90/2681856] via 192.168.10.10, 00:01:04, Serial0/0/1
[90/2681856]
via 172.16.3.1, 00:01:03, Serial0/0/0
C
192.168.10.8/30 is directly connected, Serial0/0/1
L
192.168.10.9/32 is directly connected, Serial0/0/1
R2#
R3
R3>ena
R3#conf t
Enter
configuration commands, one per line. End with CNTL/Z.
R3(config)#int
s0/0/0
R3(config-if)#no
shut
0 komentar:
Posting Komentar